How do I know if my paslode battery is bad?

If the battery is damaged, the red indicator light on charger does not flash when you try to charge the battery. If the battery isn’t accepting a charge when you mount it on the charger, you must replace it. A new battery doesn’t come fully charged, so charge it before inserting it into the Paslode.

Can you charge a lithium battery with a regular charger?

You can use a lead-acid charger to charge lithium batteries as long as you can set the maximum voltage of the charger and as long as the charger does not have an automatic equalisation mode enabled.

How long does it take to charge a Paslode battery?

This Paslode Lithium Battery Cell is a great power tool accessory. It takes 90 minutes to fully charge. It can be used with a Paslode Framing Nailer, Paslode Gas Brad Nailer, Paslode Impulse Angled Nailer and a Paslode Gas Posit Placement Nailer.

Do you need a special charger for LiPo batteries?

It’s important to use a LiPo compatible charger for LiPos. As I said in the Introduction, LiPo batteries require specialized care. They charge using a system called CC/CV charging. It stands for Constant Current / Constant Voltage.

How do I charge my LiPo with a mobile charger?

Charging your battery

1. Connect your Battery’s T-Connector to the T-connector-to-Banana-Plug Cable.
2. Connect the Balance Connector to the 3 Cell port in the LiPo Charger.
3. Plug your 12v 5A power supply into the Balance Charger using a 2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter.
4. Press the Batt.
5. Press the Inc.

What does it mean when paslode charger flashes red and green?

Look at the lights on the charger unit – an alternating flashing red and green light means that the battery is faulty. In this instance take the battery back to the dealer that you bought it from and they should be able to help you.

Can I charge a lithium battery with a Nicad charger?

The earliest lithium-ion batteries were not backward-compatible with nicad battery tools, but that’s changed over time. Due to advances in battery circuitry, however, chargers are not forward-compatible; the charger that came with a nicad tool will not work with lithium-ion batteries.

Why is my battery tender flashing red and green?

Hi Check how you connected the battery to the Battery Tender. This red-green blinking means you hooked up the battery “polarity” wrong. When hooking up battery to a charger or when jumping from another vehicle you hook the positive to the positive terminal and then the negative to the negative terminal.