Tips and Tricks

How do I calculate how many tiles I need?

How do I calculate how many tiles I need?

Multiply the tile length by the width to figure the area that one tile will cover in square inches. Divide the result by 144 to convert it to square feet. Then, divide the area you’re tiling by the square footage of one tile to determine how many tiles you need.

How many 20×20 tiles do I need?

The number of square feet is first divided by “2.8” which is the number of square feet covered by one 20 x 20 inch tile. Take that result and multiply times 1.15 to get the number of tiles you will need if you allow for trim and pattern matching.

How do you calculate wall tiles?

7 steps to measure wall tiles

  1. Sketch out the wall you are looking to tile.
  2. Measure the length of the wall area you’d like to tile.
  3. Measure the height of the wall area you’d like to tile.
  4. Calculate the area of the wall (length x height); example 3.2 x 2.5 = 8m2.

How many sqft is a 20×20 tile?

Tile Calculator by Tile Size

Size (inches) Square Feet
16×16 1.78
18×18 2.25
20×20 2.78
24×24 4

How many square feet is 20 inches by 20 inches?

20 inches is 20/12 = 1.666 feet so 20 inches by 20 inches is 1.666 × 1.666 = 2.778 square feet and 90/2.778 = 32.4 so it will take at least 33 tiles but I can’t tell you the exact number.

How many 300×300 tiles are in a box?

Product Specification

Finish Matt
Category Ceramic Tiles
Number of Pieces per Case 10
Tile Type Floor
Weight Per Box 11.50 KG

How do you calculate tiles per square meter?

How do I calculate the number of tiles I need? Multiply the length and width or height or your wall or floor. This will give you the number of square meters you have. Then multiply the length and width of the tiles you propose to use this will give you the square meter area of the tile.

How do I calculate bathroom wall tiles?

Measure every side in inches and mark the drawing or photo. If needed, break the spaces into sections, labeling each with a capital letter from A-Z to keep them from getting confused. Multiply the height and width of each section. Add together all the sections and divide that number by 144 for the square footage.

How much flooring do I need calculator?

Floor Tile Calculator: Multiply the length times the width, then divide by the area of the tile. Since most come in inch measurements, you’ll need to divide square inches by 144 to find square feet. Shower Tile Calculator: Calculate each wall, ceiling and floor individually, then add together.

How do you calculate the square footage of a tile?

To determine the number of floor tiles required to cover a given space, multiply the length by the width of the space in feet to calculate the total square footage or area, then divide that number by the size of the tile. This is easiest with 12-inch tiles, but it is possible for any size of tile.

How do you calculate price of tile?

To price the tile, calculate the area of the job by multiplying the length of the room by the width for the total square feet. Multiple the total square feet by the tile price per square foot, and then add 20 percent for cuts and breakage.

How many tiles do I Need?

Doing your calculations you would need 6 tiles across or actually 5.3 tiles (tiles aren’t sold in pieces) and 4 tiles high or 24 Tiles in total. Doing this for each area to be tiled will give you the total number of tiles required.