How do I calibrate my Taylor digital thermometer?

Fill a tall glass with ice and add cold water. Place and hold the thermometer in the ice water for 30 seconds without touching the sides or bottom of the glass. If the thermometer is a dial thermometer, allow 1-2 minutes for temperature calibration.

How do I change my Taylor thermometer from Celsius to Fahrenheit?

With the thermometer OFF, hold down the “mode” button until the hourglass and F or C shows up. Continue mashing Mode then press the Power button and it will toggle F or C everytime you press power (while still holding Mode). Let off both buttons when it’s on the setting you want.

How do you program a Taylor thermometer?

Press and hold the “°F/°C” button for 3 seconds to switch between Fahrenheit and Celsius temperature displays. 5. Press the “UP” or “DOWN” button to set the desired target set temperature. The target “SET TEMP” appears on the right side of the screen.

What does LL mean on Taylor thermometer?

LL on freezer thermometer indicates that the interior freezer temp is so low that the thermometer cannot read it. Try raising the freezer temperature control one degree.

How do you reset a Taylor thermometer?

To reset the base, you need to remove the batteries and then reinsert. This will also clear out the base unit for time, calendar, etc., if your product has these features.

How do I turn off my Taylor digital thermometer?

13. Press and hold the “Enter” button for 3 seconds to turn the unit off. Otherwise, the unit will turn off automatically after 10 minutes if no buttons are pressed and there is no change in temperature. Note: when the thermometer turns off, its memory will return to the default setting “Beef Rare 140.0°F”.

Why does my Taylor thermometer say lll?

LLL means that the probe was exposed to temperatures below its range and HHH means that it was exposed to temperatures above its range. Sometimes, doing a hard reset will resolve the problem. Remove the battery.

How do I know if my digital thermometer is working?

For digital thermometers: Test every six months or so (depending on frequency of use) to make sure the thermometer works properly, using either the ice water or boiling water method. Many digital thermometers have reset buttons. If the accuracy is off, adjust the thermometer to the proper temperature using this button.

Do digital thermometers go bad?

Do Thermometers Expire? Thermometers do not expire, but they do have to eventually be replaced. Digital thermometers will last about 3 to 5 years, while mercury thermometers will last indefinitely as long as they aren’t cracked or damaged.

Why does my digital thermometer give me different readings?

Differences between measurements can also result from the following factors: Put the device on the table in the room where the measurement is taking place and let it cool down first. Your room temperature is too low or too high. Use your thermometer at temperatures between 10.0 °C/ 50.0 °F and 40.0 °C/ 104.0 °F.