How do I fix the error code B200 on my Canon printer?

How to Fix the Canon B200 Error

1. Reset the printer.
2. Remove any obstructions.
3. Clean the printer head.
4. Manually clean the print head.
5. Remove old ink.
6. Re-install the printer drivers.
7. Try a new ink cartridge.
8. If none of the above methods work, then the B200 error is probably accurate.

What causes B200 error?

The dreaded B200 Error on your Canon Printer usually indicates that the print head has died! When re installing the print head make sure that the ribbon cable connector is firmly plugged in to the print head itself (this usually applies to older models).

How do I fix B200 error on Canon mx860?

Do this:

1. Turn OFF Power.
2. Open the print head bay (as though you were about to change inks)
3. Turn ON power.
4. Wait for print carriage to start moving to the left and let it go past half way.
5. Before print carriage reaches left hand side (but after going halfway across) shut the cover.
6. Leave the Printer turned on.
7. Good to go.

What does E58 mean on Canon printer?

Trying to start copying before
Understand and resolve Support and / or Error Codes

How do I reset my Canon mx870?

Instructions to change the machine back to its default settings.

1. Make sure that the machine is turned on.
2. Press the Setup button.
3. Select Device settings, then press the OK button.
4. Use the button to select [Reset setting], then press the button.

How do I fix B200 error on Canon MP560?

Phase 1

1. First turn-off the printer and unplug the power button.
2. Now, open the printer cover to reveal the ink cartridges.
3. Remove the Pixma MP560 cartridges.
4. Remove the printhead from the printer carefully.
5. Clean the printhead along with the ink cartridges.
6. Clean the contact pads with a contact cleaner or a pencil eraser.