Most popular

What does E10 mean on a boiler?

What does E10 mean on a boiler?

If you have got low boiler pressure, then your boiler probably shows an E10 fault code. It will also show low pressure on the gauge if you check that. That means that you have lost too much pressure. This indicates that there is a heating system leak somewhere in your home heating system.

What does E10 mean on a Baxi boiler?

Outdoor Sensor Error
BAXI ECOBLUE (COMBI & SYSTEM) Boiler Error/Fault Codes

Error Code Possible Fault
E10 Outdoor Sensor Error
E20 Central Heating Thermistor Sensor Fault
E28 Flue Thermistor Fault
E54 HW Flow Sensor Fault

Why is the pressure low on my boiler?

The most common reason for your gas boiler pressure being too low is either a water leak somewhere in the system or reduced system pressure as a result of bleeding a radiator.

How do I reset my Baxi boiler?

To reset the boiler, turn the selector switch to the R (Reset) position. Hold for at least 5 seconds and release. The fault code will be replaced with the boiler’s current temperature. At this point on a neon indicator boiler model, the flame failure light will stop flashing and will be replaced with the burner light.

Why is my boiler flashing A and B?

What do I do when the ‘A’ and ‘B’ lights on the boiler are flashing alternately? This means that the system pressure is too low and you may see the pressure gauge indicating that it is below 1 bar and outside the green area.

What does LC mean on gas boiler?

What does my Ideal Boiler Fault Code mean?

Fault code Fault
L2 Ignition lockout – you can manually fix this with our frozen condensate guide here
L6 False flame lockout – reset your boiler and this should fix the issue
LC 5 boiler resets in 15 minutes – turn the electricity to your boiler off then on to fix the issue

What fault is E1 on a boiler?

If the code E119 is displayed (‘E1′ followed by ’19’), this means the pressure in the boiler has dropped and a water leak could be stopping the system working properly. Please report this to us by calling 0300 123 6633.

How do you fix low pressure on a gas boiler?

4. Can I fix low boiler pressure myself?

  1. Switch off and allow your boiler to cool.
  2. Double-check that both ends of the filling loop are securely attached.
  3. Open both valves, to allow cold mains water into the system (you should hear it)
  4. Wait for the pressure gauge to read 1.5 bar.
  5. Close both valves, one after the other.