What does f2e1 mean on a Whirlpool stove?

F2-E1 – Touch Pad (Keypad) Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

What does it mean when your oven says f2e1?

The F2 E1 error code (see images below) means the key tail (ribbon cable for the touchpad) is unplugged or damaged. The tech sheet advises us to check the wiring and connections, and if this does not make the error go away, it then suggests that you replace the keypad.

What does f2e1 mean on a Whirlpool microwave?

There may be a problem with the User Interface / Keypad or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the microwave for one (1) minute to ensure the error code does not display again.

How do I fix f2e1 error?

F2-E1 – Touch Pad Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

How do I put my Whirlpool oven in diagnostic mode?

Enter Diagnostics mode by pressing CANCEL>CANCEL>START within a 5-second period. Entering Diagnostics mode will cancel any active oven operation. Enter the Diagnostics mode only after the oven is cool. All elements (depending on which cycle is being used) will operate with the oven door open.

How do I fix error code f2e1?

How do I fix Maytag error code f2e1?

Cycle Power If the power cord is accessible, try resetting the machine by unplugging and replugging the power cord to the wall outlet . Restart the cycle. If the problem persists, call for service.

What does E 1 mean on my microwave?

The “E1 F1” fault code indicates an Electronic control board malfunction. This means that the control board will need to replaced.

How do I reset my Whirlpool oven control panel?

Reset power to the product:

1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
2. Power unit up by turning on the circuit breaker(s).
3. Start a bake cycle.
4. Monitor the oven for one (1) minute to ensure the error code does not display again.
5. Verify oven operation.

What does F2 mean on Whirlpool washer?

The F2 error code on the Whirlpool washer is indicated as F02, and means that the washer is taking too long to drain properly. This means there is come kind of problem with the washer’s draining system. Fixing this problem is moderately easy, depending on what the cause of the problem is.

What does F2 mean on a whirlpool microwave?

F2 on a Kitchenaid / Whirlpool / Maytag microwave means you have a shorted membrane keypad. You can find helpful exploded view diagrams and order parts by entering your full model number here. On some models, the keypad is available separately.

What does F2 error code mean on Whirlpool oven?

If you have a Whirlpool oven, the F2 E6 error means that the Cancel key line is open. You will need to replace the keypad or the keypad and controller board (if a single assembly) if the keypad doesn’t respond to a press of the Cancel Key.

What does F2 mean on a whirlpool gas stove?

F2 means that your oven thinks your oven sensor is shorted. This is either a bad oven sensor or a bad display relay control board. You can’t test the board but you can test the sensor. Open the door and remove the 3-4″ long thin metal rod attached to the back wall.

What does code F2 mean on my Whirlpool washer?

Whirlpool washing machines use error codes to let people know what has gone wrong when the machine isn’t working properly. The F2 error code on the Whirlpool washer is indicated as F02, and means that the washer is taking too long to drain properly.