What is a pre-trip checklist?

A basic DOT pre-trip inspection includes checking your fluid levels, leaks, tires, 5th wheel, brakes, clutch, shock absorbers, ball joints, kingpins, gauges, lights, and more. Once you’ve completed a check of your truck, you can log your DOT pre-trip inspection in your log books and be on your way.

What is the pre-trip?

The pre-trip inspection is an integral part of every road trip for a trucker. This inspection is meant to be a thorough check of the truck, trailer and load. The check is to ensure that everything is in correct working order, prior to the truck and driver, departing on a trip.

Are pre trips required?

It’s the Law They’re required under federal law. The Federal Motor Carrier Safety Administration (FMCSA) requires pre-trip inspections before each haul. The driver must be satisfied that all parts are in good working order. So a driver taking a multi-day trip must perform an inspection each day.

How often should you do pre trip inspection?

A pre-trip truck inspection is a thorough check of the truck and its major systems to maintain safety on the road. Inspections need to occur before the start of a driver’s shift and at least once every 24 hours while on the road.

How long should a pre-trip be?

It is the driver’s responsibility to ensure the vehicle is safe for operation and is free from defects. Currently, there are no guidelines as to how long a pre-trip inspection should take. If you check everything you should be checking, a full inspection should take you approximately 30 to 50 minutes.

What are some key steering system parts?

Name some key steering system parts. Steering wheel, steering gear box, tie rod, spindle, drag link, steering ring knuckle, steering arm. Steering wheel shaft. Name some suspension system defects.

What is included in the CDL pre-trip inspection?

CDL Pre-Trip Inspection manual CDL Skills Test PRE-TRIP Inspection 7505 Dahlia St. Commerce City, CO 80022 303-227-7841 Engine Compartment +1 Axle Side and Back of Truck +1 Axle Connections and Trailer +1 Axle External Light Check In-Cab with Brake Check Leaks, Leans, Lights (3 L’s) 3 Components Look for FINS! Belts and Hoses

What is the commercial vehicle pre-trip inspection test?

The Commercial Vehicle Pre-Trip Inspection Test is designed to test your ability to check a variety of commercial vehicle safety equipment and vehicle components. You are required to check the items listed below that relate to the operation of your vehicle. You will need to point out the item to be checked and explain how you check that item.

Who is the author of CDL pre-trip inspection manual?

CDL Pre-Trip Inspection manual Author Michael Fox! Subject CDL Skills Test Pre-Trip Inspection study guide Keywords

What is on the truck driver’s Check list?

TRUCK DRIVERS’ PRETRIP CHECK LIST Office of Motor Carriers, US Department of Transportation & Federal Highway Administration INSIDE □ Parking Brake (Apply) START ENGINE □ Oil Pressure (Light or Gauge) □ Air pressure or Vacuum (Gauge) □ Low Air or Vacuum Warning Device (Air pressure below 40 psi check on pressure build-up.