Why is my Sub-Zero flashing vacuum condenser?

The Vacuum Condenser message appears when the unit is not running efficiently or temperatures are too high. This can be due to a dirty condenser, a door sealing issue, or a problem with the unit. If temperatures are high, call for service.

Where is the condenser on my Sub-Zero fridge?

In all Sub-Zero Built-In and Pro 48 models, the condenser is located behind the grill. First pull out on the bottom edge of the grill and tilt forward. Then using a soft bristle brush vacuum to remove dust and lint from the condenser.

How do I reset my subzero 650?

To reset a Sub-Zero product:

1. Turn the unit off at the control panel. For units with a dial control, turn the knob to zero (0) or off.
2. Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.

Why does my Subzero fridge smell?

New Sub Zero Refrigerator New units can have an odor to them if stale air gets trapped inside during shipment. We suggest cleaning the refrigerator’s interior with a mild detergent, water, and soft cloth. Remove drawers and shelving and clean with the same method to dispel odor.

How long do Sub-Zero refrigerators last?

about 20 years
Answer: Sub-Zero products are designed to last about 20 years on average. Due to varying levels of use, ambient temperatures, maintenance and repair history and uncontrolled variables such as mechanical failure of part components, the life of any appliance will vary widely.

Where is condenser coil fridge?

The condenser coils are located either under the refrigerator behind the base grille, on the back of the refrigerator or on the top of the refrigerator. To minimize the possibility of electric shock, always unplug the refrigerator from the power supply before attempting any maintenance or cleaning.

What is a vacuum condenser in a refrigerator?

The “Vacuum Condenser” message appears when the unit is not running efficiently or temperatures are too high. This can be due to a dirty condenser, a door sealing issue, or a problem with the unit. If temperatures are near normal, turn off the unit and Clean the Condenser.

Why is my Sub-Zero not cold?

If your Sub-Zero refrigerator is not cold enough, check to make sure that the door is closed properly. This gasket creates a tight seal that keeps cold air in and prevents warm air from entering. If the gasket is dirty or damaged, cool air may escape and raise the refrigerator’s temperature even if the door is closed.

https://www.youtube.com/watch?v=5OJMJEseTOk