What transducers work with Garmin striker 4?

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Are all Garmin transducers interchangeable?

Garmin Transducers are generally interchangeable. We have one of the best ranges of Garmin Transducers in stock.

How do I choose a Garmin transducer?

When selecting a transducer, it is important to select one made of a material compatible with that of the vessel hull. Plastic transducers, most commonly built for transom-mounted and in-hull installations, can be used on fiberglass or metal boats.

Can a transom mount transducer be used with inboard engines?

Question: The installation manual says the transom mount transducer is not recommended for large inboard engines. Answer: You can mount it on an inboard boat, but it is not optimal because of the turbulence created by the propeller.

Where do you mount transom transducer?

The location should be as close to the center of the boat as possible, but on the side of the downward swing the propeller. On the majority of boats, this will be on the starboard (right) side.

What transducer comes with Garmin striker 4 plus?

Garmin dual-beam transducer
The STRIKER Plus 4 features a waterproof 4.3″ display and comes with Garmin dual-beam transducer.

What are the specs of a Garmin transducer?

Transducer Name Picture Description Garmin P/N Price Frequency (kHz) Power (rms) Beam Width (º) LF/HF (-3dB) Max Depth Depth/ Speed/ Temp # of Pins Cable Length (ft) Supported Deadrise/ Transom Angles ACCESSORIES

How do I mount a transducer on the transom?

1. Position the transducer mount ➊ at the selected mounting location on the transom (page 2). 2. Align the transducer parallel with the water line ➋, and mark the center location of each hole on the transducer mount. 3. ➌Using a 5/

Where should I Mount my transom-Mount?

Select a transom-mount location while considering these guidelines for optimal performance. • Mount the transducer as close to the center of the boat as possible. • Do not mount the transducer behind strakes, struts, fittings, water intake or discharge ports, or anything that creates air bubbles or causes the water to become turbulent.

What is a transducer on a boat sounder?

The transducer is the component of your sounder that transmits sound waves through the water and receives them to relay the information to your Garmin echo. With the supplied hardware, you can install the transducer on the transom of your boat (page 2) or on your trolling motor (page 3).