Tips and Tricks

Can Fox shocks be rebuilt?

Can Fox shocks be rebuilt?

FOX’s shocks are ‘serviceable’ – meaning each shock can be rebuilt with new internals, and a new nitrogen gas charge can be applied to the shock, complete ride refreshment.

How much does it cost to rebuild 2.5 Fox shocks?


2.5 Bypass 2.5 Internal Bypass 3.0 Bypass XP 1000 Front $150 $35
3.0 Internal Bypass 3.5 Bypass XP 1000 Rear $250 $35
4.0 Bypass $300 $35
4.4 Bypass $350 $35

How much does a Fox fork service cost?

$190 USD / $220 CAD* Thorough inspection of fork for damage and/or wear. Complete tear down and rebuild of damper, including new seals and oil. New dust wipers and foam rings.

Are Fox shocks lifetime warranty?

Warranty Policy. The factory warranty period for your fork/shock is one year (two years for countries in the EU) from the original date of purchase of the bicycle or fork/shock. Warranty is at the full discretion of FOX Racing Shox and will cover only defective materials and workmanship.

How often do Fox shocks need rebuilt?

A complete shock rebuild is recommended every 1,000 miles for off-road race applications. Split street/off-road–use vehicles every 10,000 miles, and street every 50,000 miles. A FOX complete shock rebuild service includes new seal kit, new proprietary JM92 Suspension Fluid, deburr and polishing of shock shafts.

Are Fox 2.0 shocks Rebuildable?

Another distinguishing factor of the Fox 2.0 is its ability to be rebuildable and rechargeable (nitrogen gas), this makes any Fox shock a lifetime shock that can last the life of any vehicle.

How do I know when my shocks are bad?

The Warning Signs Of Worn Shocks And Struts

  1. Instability at highway speeds.
  2. Vehicle “tips” to one side in turns.
  3. The front end dives more than expected during hard braking.
  4. Rear-end squat during acceleration.
  5. Tires bouncing excessively.
  6. Unusual tire wear.
  7. Leaking fluid on the exterior of shocks or struts.

How do you service a Fox Shock shaft?

SHOCK SERVICE. Get serviced by the same FOX technicians the pros depend on, utilizing genuine FOX parts and fluids. Basic service includes new oil, and labor — and we’ll debur and polish the shock shaft, as well as perform a deep cleaning.

How much does it cost to replace shocks on a Fox?

We have the technicians and parts standing by to get your FOX shocks back in action. Labor is $130 per shock and includes a standard service. FOX can provide an estimated repair cost prior to receiving your shocks.

What does Fox do for service and repair?

WHETHER YOU NEED SERVICE, REPAIRS, OR WANT AN OVERHAUL, FOX IS HERE FOR YOU. Thorough inspection of shock for damage and/or wear. Complete tear down and rebuild of damper, including new seals, oil, and nitrogen recharge. *Price may be higher if product is severely damaged and requires replacement parts that will exceed original estimate.

How much does it cost to have a Fox product serviced?

Guaranteed one day in-house turnaround time in conjunction with FOX’s New ‘Service Reservation System’. An additional $79 USD / $99 CDN fee will be added to your Factory Service charge for a single product and a $99 USD / $129 CDN fee will be added for two or more products sent in.