How do you use a fanfold?
How do you use a fanfold?
When using fanfold labels, you can usually place them behind the printer and run them through a slot at the back of the printer, and then into the printer roller. Since fanfold labels are not installed inside a printer, there is no limit to how many labels are in a single package of a fanfold label.
Should you tape fanfold insulation?
To be an effective weather-resistive barrier, though, the seams of the fan-fold must be carefully taped, since any seam can provide a pathway for water to reach the structure under the foam. As long as the foam is not foil-faced, the best tape is contractor’s tape from 3M.
Does fanfold help insulate?
Exterior fanfold insulation is the foam-type of insulation that is applied between your home’s exterior and the siding, and it offers some protection from moisture, in addition to creating a layer of thermal insulation.
What is the R value of 3 8 fanfold insulation?
R-Value 1.70 @25F.
Do you have to tape insulation seams?
Jan 19, 2008 · If you are installing insulation and have to piece it together and it has paper on one side, you tape the seams to get a better seal. If the fiberglass insulation has no paper at all, it is unfaced and has no vapor barrier and does not need taping.
What is fan fold siding?
FANFOLD foam residing board is a thin perforated, extruded polystyrene foam board faced on one side with a plastic film facer and combines proven XPS foam technology with a unique design to enhance the application of new or replacement siding.
What is the R-value of fanfold?
Technical Information
| Property | Test Method | 1⁄4″FANFOLD |
|---|---|---|
| R-Value (ft2·hr·F/Btu) | ASTM C518 (Modified) | 1.0 |
| Water Absorption, maximum % by vol., max | ASTM C272 | 2.0 |
| Water Vapor Permeance, perms, min | ASTM E96 (Procedure A) | 1.0 |
| Compressive Strength, psi, min | ASTM D1621 (Modified) | 8 |
What is a fanfold?
n. A continuous sheet of paper that is folded in a regular, alternating fashion.
What is the R value of fanfold insulation?
R-Tech Fanfold 1/2 inch thick Roof Underlayment/EPS Insulation with Foil, 1.25 Density Type VIII, White Faced one Side, Foil on the Other, UL Listed, R-Value R-Value 2.27 @25F.
Is fanfold insulation waterproof?
Stable R-value. The product’s thermal properties will remain stable over its entire service life. There is no thermal drift, so the product is eligible for an Insulfoam 20-Year Thermal Performance Warranty. Water Resistance.
What is the R value of fan fold?
Provides R-Value of R-Value 2.27 @25F. The core of R-Tech is the same high-quality as InsulFoam brand insulations. In addition, R-Tech has excellent dimensional stability, compressive strength and water-resistant properties.
What is fanfold foam residing board?
FANFOLD foam residing board is a thin perforated, extruded polystyrene foam board faced on one side with a plastic film facer and combines proven XPS foam technology with a unique design to enhance the application of new or replacement siding. Skip to main content Owens Corning Commercial Products
What is fan-fold vinyl siding?
Fan-fold is typically sold in 1/4-inch by 4-foot by 50-foot sections and is installed horizontally across the existing siding to level out irregularities before re-siding with vinyl. This creates a horizontal seam every 4 feet.
Is fan-fold foam insulation an adequate weather-resistant barrier for vinyl siding?
Before installing vinyl siding over existing wood siding, we first install a layer of fan-fold foam insulation. Is the fan-fold foam an adequate weather-resistive barrier? A.Corresponding editor Paul Fisette responds: Rigid foam will shed any water that gets past leaky vinyl siding.
How does water get behind a fan-fold?
All penetrations, as well as areas around doors and windows, require careful detailing. If the fan-fold and J-channel are simply butted against existing window and door casings, water can get between the J-channel and the casing, and then behind the fan-fold.