How do you use the CB09 in cameo 3?

To put the Graphtec CB09 blade into your Silhouette CAMEO or Portrait you will slip it into the blade housing. You may need to wiggle it a little bit, but it will fit in the CAMEO 3. Now you can use the blade to cut as you would with a regular Silhouette ratchet blade.

Which CB09 blade for HTV?

45 degree blade
Graphtec CB09 Blades The 45 degree blade is great for cutting standard 2-4 mill vinyls such as Oracal 651, 631 and HTV vinyls. This is the most popular blade. The 60 degree blade is for cutting thick material such as the HTV Glitter, StripFlock and brick, etc.

Are silhouette blades interchangeable?

Each blade is standard size, meaning that you can (mostly) use the same blade in your Curio as you do in your Portrait or Cameo.

What is a CB09 blade?

Graphtec CB09 Blades The 45 degree blade is great for cutting standard 2-4 mill vinyls such as Oracal 651, 631 and HTV vinyls. This is the most popular blade. The 60 degree blade is for cutting thick material such as the HTV Glitter, StripFlock and brick, etc.

Can the CB09 blade be used in cameo 4?

Your CB09 blade adapter can now be installed into the Cameo Silhouette 4.

Can I use a CB09 blade with cameo 4?

The blue tool adapter is intended for Silhouette sketch pens so in Silhouette Studio you’ll need to manually adjust the material from Cardstock to your preferred Foil Quill Silhouette settings. The CB09 Blade can also be used in the CAMEO 4…but I will warn you it’s a tight squeeze.

Should I get a cb09 blade holder and blades?

If you have experienced these problems and cannot find the AutoBlades or just want an alternative, you might want to consider getting a CB09 blade holder and blades.

How do you attach a cb09 blade to a tool adapter?

You just place the CB09 blade holder into the blade holder carriage directly. There are some supposed CB09 blade holders on the market that are too large to fit in the tool adapter. Be sure you purchase the correct product. I have linked them in this post and you will find a set of links for the blade holders and replacement blades below.

What angle does the cb09 blade cut?

This picture shows how perfectly the CB09 blade cut out my letters. Note that there are 3 angles of blades available — the 30 degree blade for very thin vinyl and vellum type materials, the 40 degree blade for general purpose applications like card stock and the 60 degree blade for thicker materials.

Are there any problems with the silhouette cameo 4 AutoBlade?

Many people have reported that they are having problems with the AutoBlade in the Silhouette Cameo 4 and with finding replacement blades. If you have experienced these problems and cannot find the AutoBlades or just want an alternative, you might want to consider getting a CB09 blade holder and blades.