What are the parts of a sprayer?

Components of a sprayer are as follows:

• Nozzle Body: It is the main component on which other components of a nozzle fit.
• Swirl Plate: It is the part of a cone nozzle which imparts rotation to the liquid passing through it.
• Filter:
• Over-Flow Pipe:
• Relief Valve:
• Pressure Regulator:
• Cut-Off Valve:
• Spray Boom:

What are the classification of sprayer?

Types of sprayers Depending on the source of power it can be classified as manually operated and power operated dusters. The manually operated dusters are (i) package duster (ii) plunger duster (iii) bellow duster and (iv) rotary duster.

What is the main function of sprayer?

The main function of a sprayer is to break the liquid into droplets of effective size and distribute them uniformly over the surface or space to be protected. Another function is to regulate the amount of insecticide to avoid excessive application that might prove harmful or wasteful.

How do you calibrate a sprayer?

Fill the sprayer tank (at least half full) with water. Run the sprayer, inspect it for leaks, and make sure all vital parts function properly. Measure the distance in inches between the nozzles. Measure an appropriate travel distance in the field based on this nozzle spacing.

How does pressure sprayer work?

A pressure sprayer is a chamber which is filled with a liquid which can be a lubricant, paint or chemical, then filled with compressed air to allow the liquid to be sprayed at pressure. Units are typically of cast iron or stainless steel design.

What are the basic components of a sprayer?

BASIC COMPONENTS OF A SPRAYER Components of a sprayer are as follows a) Pump b) Chemical tank c) agitator d) Air chamber e) pressure gauge f) Pressure regulator g) valves h) Strainer i) suction line j) delivery line k) nozzles Pump :A pump is a device used to move fluids, such as liquids or slurries, or gases from one place to another.

What are the parts of a knapsack sprayer?

The Parts of Knapsack Sprayers. Knapsack sprayers have tanks of fertilizer, insecticide or herbicide that gardeners wear on their backs to spray gardens or trees. The gardener controls a nozzle with his right hand and a pump handle with his left hand to keep up the pressure in the tank.

How to plumbing your sprayer the right way?

Plumbing Your Sprayer the Right Way. Posted by Sprayer Depot on Thu, Jul 31, Tweet; The primary goal when you’re plumbing a sprayer pump is to route liquid from the pump to the spray nozzle with as little restriction as possible. By minimizing restrictions . The plumbing systems of agricultural sprayers are usually considered foolproof.

How does an air sprayer work?

For spraying, the tank is usually filled to three-fourths capacity and pressurized by air pump. The compressed air causes the agitation of the spray liquid and forces it out, on operation of the trigger or shut off type valve.